You are currently viewing ArcWear Expands its Scope in UL DAP

ArcWear Expands its Scope in UL DAP

ArcWear is proud to announce a newly expanded Scope in UL’s third party Data Acceptance Program (DAP). ArcWear joined the program earlier this year with a limited scope to perform tests in ASTM F1506 and NFPA 2112.

As part of our continual improvement efforts, ArcWear has added several upgrades over the past few months. And those upgrades have provided the opportunity to expand our scope to offer several additional tests. ArcWear can now provide UL with certification data on all small-scale fabric tests required by NFPA 2112 and ASTM F1506.

ArcWear’s updated UL DAP Scope Includes

ASTM F1506

  • 7.1 – Breaking Load
  • 7.2 – Tear Resistance
  • 7.3 – Bursting Strength
  • 7.4.1 – Colorfastness: Laundering
  • 7.5 – Dimensional Change
  • 7.6 – Flammability

NFPA 2112

  • 8.1.3 – Washing and Drying Procedure
  • 8.2 – Heat Transfer Performance
  • 8.3 – Flame Resistance
  • 8.4 – Heat and Thermal Shrinkage Resistance
  • 8.7 – Label Print Durability
  • 8.8 – Protective Glove Flame Resistance

For more information on these specific tests, please visit our Testing Services page and navigate to the specific Standard or Test Method. By participating in the DAP, ArcWear hopes to provide expedited testing services to its clients who are seeking UL Certification to these two Standards.

To initiate a UL Certification project with ArcWear, simply open a project with UL and request that ArcWear perform your testing. Please Contact Us to put you in touch with the right folks at UL to get a Certification project started.

This Post Has One Comment

Leave a Reply