Close

AR gloves

Specifying Arc Rated and FR Gloves

What’s new with Arc Rated and Flame Resistant Gloves and what should you consider when specifying them into your PPE Program? The need is increasing for gloves that protect from multiple hazards like cut, puncture and abrasion listed in ANSI 105 in addition to arc ratings and flame resistance. Read ArcWear’s Incident Prevention article to […]

Read More

ASTM F2675-19 Published

ASTM F2675 has been revised and published as a 2019 edition with significant updates. All references to ASTM D120 for rubber insulating gloves and ASTM F696 for leather protectors have been removed. This change allows rubber gloves and leather protectors to be rated independently of those product conformance standards. Arc ratings were previously limited in […]

Read More

Arc Rated Rubber Gloves and Protector Gloves Coming Soon Via ASTM and IEC

ASTM F18 voted by 92% to allow testing of ASTM D120 and ASTM F696 gloves for arc ratings.  Many had been tested, but few manufacturers would label the gloves because the committee had included a statement in the scope to exclude D120 and F696 gloves from arc testing.  While the statement was intended to prevent […]

Read More

ASTM F1959 or ASTM F2675? Which Test Should Be Used for Gloves?

Question: Should I be Testing FR Gloves for Arc Flash Exposures to ASTM F1959 or ASTM F2675? Answer: Today, gloves should be tested to ASTM F2675. ASTM F2675 is a specific test for gloves. ASTM F1959 is used to test flat fabrics on a panel. The previous edition of ASTM F2675 allowed materials  tested on […]

Read More

Want to Label Gloves “FR”? Here’s What You Should Know.

We are commonly asked, “I want to label my gloves as flame resistant—what do I need to do?“.  This can be a challenging question. To date, gloves are not thoroughly addressed by the specifications used to indicate flame resistance in the industry (like NFPA 2112 for the industrial flash fire hazard or ASTM F1506 for the […]

Read More